Pulsafeeder LC54GA-VHC1-XXX PULSAtron Series C Metering Pump
Pulsafeeder LC54GA-VHC1-XXX Series C chemical metering pump delivers up to 30 GPD at 80 PSI with 115 VAC power, external pacing, PVC head, Hypalon seals and ceramic valve balls.
The Pulsafeeder LC54GA-VHC1-XXX is a PULSAtron Series C solenoid-driven diaphragm metering pump designed for accurate chemical feed applications. It delivers up to 1.25 GPH / 30 GPD at a maximum discharge pressure of 80 PSI.
This Series C model operates on 115 VAC, 50/60 Hz power and combines manual stroke-length adjustment with an external pacing input and prime button. In manual operation, stroke length is adjustable while stroke frequency remains fixed. In pacing mode, stroke frequency is controlled by the external pacing signal.
Performance & Control
- Maximum Flow: 1.25 GPH / 30 GPD
- Maximum Pressure: 80 PSI
- Power Supply: 115 VAC, 50/60 Hz
- Control: Single manual control with external pacing input
- Prime Function: Prime button
- Turndown Ratio: 10:1
- Maximum Stroke Rate: 125 strokes per minute
- Maximum Viscosity: 1,000 cP
Liquid-End Materials
- Head and Fittings: PVC
- Valve Seats / O-Rings: CSPE / Hypalon
- Valve Balls: Ceramic
- Diaphragm: PTFE-faced CSPE
- Tubing Connection: 3/8-inch OD
Series C Design Features
PULSAtron Series C pumps use a positive-displacement diaphragm design with guided ball check valves to support reliable priming and reduce reverse flow. The pump drive is fully enclosed, while the electronics are housed in a chemical-resistant enclosure for added protection in chemical-feed environments.
- External pacing capability for automatic feed control
- Manual stroke-length adjustment
- Guided ball check valve system
- Thermal overload protection with automatic reset
- Electrical circuit protection
- Water-resistant enclosure for indoor and outdoor installations
- Sealless liquid-end design
- Designed for continuous-duty metering service
The LC54GA-VHC1-XXX is suitable for chemical dosing, water and wastewater treatment, disinfection, pH control and other applications requiring controlled chemical injection. Always confirm chemical compatibility with PVC, CSPE/Hypalon, ceramic and diaphragm materials before installation.
| Brand | Pulsatron |
|---|---|
| Product Type | Pump |
| Material - Diaphragm | PTFE / CSPE |
| Inlet Size | 1/4 in |
| Motor Hz Rating | 50/60 |
| Motor Voltage | 115/230 VAC |
| Outlet Size | 1/4 in |
| Max Flow | 1.25 gph |
| Accessories Available | Dampeners , Gauges , KOP Kits , Pre-Engineered Systems , Process Controllers , Tanks |
| Max Pressure | 80 psi (5.6 bar) |
| Turndown Ratio | 10:1 |
| Average Current Draw | 0.6 / 0.3 |
| Controls | External Pacing w/ Prime Button |
| Peak Input Power | 130 Watts, Average Input Power At Max SPM: 50 Watts |
| Tubing | Tubing .25" I.D. x .38" O.D. / .25" Ball, 0 - 1.88 GPH |
| Displacement | Positive Displacement |
