PULSAtron Pumps LC13BA-PHC1-XXX | LC13BA-PTC1-XXX | LC13BA-PTC1-500 | LC13BA-PTC1-520

ยป Plus pumps

PULSAtron Pulsafeeder Plus Metering Pumps :

The PULSAtron Plus family consists of 5 unique series that combine basic control functions into a PULSAtron pump, eliminating the need for separate pieces of equipment.

The Pulsatron Plus Series CL Pulsafeeder metering pumps provides conductivity monitoring and control with a Limit Timer that controls the feed time. Tower feed and bleed are initiated with a when the conductivity level reaches the user-specified set point.
The PULSAtron Plus Series CL Metering Pump was designed to control conductivity and feed inhibitor in an open-air cooling tower. The Series CL Pulsafeeder Metering Pumps combines everything you need to control conductivity and feed inhibitor into one unique, compact package to create a simple and cost effective metering and control system.
The Series CL Metering Pump includes a conductivity sensor, bleed relay and a user programmable limit timer. When conductivity reaches the user specified level, the system activates the bleed relay and begins pumping inhibitor. The 'feed & bleed' cycle will continue until conductivity returns to the desired level.


The Pulsatron Plus Series CW Pulsafeeder metering pumps provides conductivity control with a water meter feed. Bleed is initiated when the conductivity level reaches the user-specified set point. Chemical feed is initiated and controlled by input from a water meter.
The PULSAtron Plus Series CW Pulsafeeder Metering Pumps was designed to control conductivity and feed inhibitor in an open-air cooling tower. Chemical feed is initiated and controlled by input from a water meter. The Series CW combines everything you need to control conductivity and feed inhibit into one unique, compact package to create a simple and cost effective metering control system.
The Series CW Pulsafeeder Metering Pumps includes a solenoid actuated metering pump, conductivity sensor, bleed relay and a dry contact input for water meter control. At set-up, the operator sets the conductivity set point, differential (or dead-band), the pump stroke frequency and run time. When conductivity reaches the set point, the system activates the bleed relay.


The Pulsatron Plus Series ET Pulsafeeder metering pumps provides feed control with input from a water meter input. The output connection provides an isolated dry contact output of the water meter contact to operate additional pumps or timers off the same water meter.
Series ET pulsafeeder pulsatron Metering Pumps was designed to feed chemical in response to a water meter input. Typical applications include inhibitor feed for an open air-cooling tower. The Series ET provides everything you need in one unique, compact package to create a simple and cost effective metering system.
The Series ET pulsafeeder Metering Pumps counts pulses from a water meter. When the count exceeds a set value (either 1 or 10), the pump starts. The pump will continue to run for an adjustable time period.


The Pulsatron Plus Series T7 Pulsafeeder metering pumps was designed to control the feeding of biocide or other product that must be fed on a timed schedule. The Series T7 includes a 7-day programmable timer with the ability to control up to 8 on/off cycles per day.
Series T7 pulsafeeder pulsatron Metering Pumps was designed to feed chemical products on a timed schedule. Typical applications include the feed of biocides in open-air cooling towers. The Series T7 provides everything you need in one simple and cost effective metering system for timed applications.
The Series T7 pulsafeeder Metering Pumps is controlled by a 7-day programmable timer. The timer is programmable in 1-minute increments with up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a 7-day cycle. Other control features include a standby mode, continuous 'ON' mode and the ability to adjust the stroke length from 0-100%.
There is no need for a separate timer. All timer functions are integrated into the pump eliminating the expense of purchasing an installing another piece of equipment.

Available Models : | | |

The Pulsatron Plus Series T7 Pulsafeeder metering pumps was designed to control the feeding of biocide or other product that must be fed on a timed schedule. The Series T7 includes a 7-day programmable timer with the ability to control up to 8 on/off cycles per day.
The PULSAtron Plus Series WT Pulsafeeder metering pumps was designed to control the feed and bleed cycle in an open-air cooling tower. The feed and bleed cycle is initiated and controlled by input from a water meter. The Series WT Metering Pump combines everything you need to bleed off the tower and feed inhibitor into one unique, compact package to create a simple and cost effective metering and control system.
The Series WT Pulsafeeder metering pumps includes a water meter input with programmable pulse timers that control the feed and bleed relays. When the water level in the cooling tower drops, the make-up water is turned on creating flow through the water meter. As make-up water passes through the water meter, it generates a series of pulses based on the volume of flow.


You can find different styles of Products & Parts here.

Related Products:

Pulsatron Electric Pumps Series A+

Electric Pumps Series A+

Series C

Series C

Series C+

Pulsatron Electric Pumps Series C+

Series D

Electric Series D

Series E

Pulsatron Electric Pumps Series E