The Pulsatron plus T7 series Chemical metering pumps was designed to feed chemical products on a timed schedule. Typical applications include the feed of biocides in open-air cooling towers. The Series T7 provides everything you need in one simple and cost effective metering system for timed applications.
The Series T7 pulsatron pumps is controlled by a 7-day programmable timer. The timer is programmable in 1-minute increments with up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a 7-day cycle. Other control features include a standby mode, continuous 'ON' mode and the ability to adjust the stroke length from 0-100%.
There is no need for a separate timer. All timer functions are integrated into the pump eliminating the expense of purchasing an installing another piece of equipment.
The event-based timer allows the Series T7 pulsatron pumps to be used for a wide variety of timed applications. The guided check valves with the proven seat and ball designs make the PULSAtron the most reliable metering pumps in the world. PULSAtron pumps are know for excellent suction lift characteristics resulting in highly dependable chemical additions.
|LC13BA-KTC1-130||PULSATRON PARTS AND ACCESSORIES Item ID: LC13BA-KTC1-130, Specifications: Pulsatron T7 .50 gph, PVDF/TFE/Ceramic|
|LC14BA-PTC1-XXX||PARTS AND ACCESSORIES Item ID: LC14BA-PTC1-XXX, Specifications: Pulsatron T7 1.00 gph, GFPPL/TFE/Ceramic|
|LC64BA-VTC1-XXX||PULSATRON PARTS AND ACCESSORIES Item ID: LC64BA-VTC1-XXX, Specifications: Pulsatron T7 1.25 gph, PVDF/TFE/Ceramic|