Pulsafeeder L3101TC3-PVC PVC Suction Valve Assembly - 1/2 Inch Tubing
PVC/PTFE Suction Valve for VTC3 & WTC3 Wet Ends | 1/2-Inch OD
Pulsafeeder L3101TC3-PVC PVC suction valve assembly for compatible TC3 wet ends with 1/2-inch OD tubing connections.
The Pulsafeeder L3101TC3-PVC is a PVC suction valve assembly for compatible TC3 wet-end configurations using 1/2-inch outside-diameter tubing.
This replacement valve is designed for the suction side of a chemical metering pump, where it helps control liquid entry into the pump head during normal operation.
Product Specifications
- Manufacturer: Pulsafeeder
- Part Number: L3101TC3-PVC
- Product Type: Suction Valve Assembly
- Body Material: PVC
- Valve Position: Suction Side
- Tubing Connection: 1/2-Inch OD
- Wet-End Configuration: Compatible TC3
- Application: Chemical Metering Pump
- Seal Material: Verify Original Specification
- Pressure Rating: Verify Manufacturer Documentation
Suction Valve Operation
The suction valve helps direct chemical solution into the metering pump liquid end while limiting reverse flow. Proper operation supports consistent fluid movement during the pumping cycle.
PVC Valve Construction
The valve assembly is identified with PVC construction. PVC is used in many chemical feed components, but compatibility must be confirmed for the specific chemical and operating conditions.
1/2-Inch Tubing Connection
The assembly is specified for a 1/2-inch outside-diameter tubing connection. Confirm tubing dimensions, coupling hardware and original valve configuration before replacement.
TC3 Wet-End Applications
The L3101TC3-PVC is intended for compatible TC3 wet-end arrangements. Different pump models may use different sealing materials or valve configurations.
Typical Applications
- Chemical metering pump suction maintenance
- PULSAtron liquid-end servicing
- Water treatment chemical dosing
- Industrial chemical feed systems
- Replacement suction valve assemblies
Inspection and Maintenance
Inspect the original valve for deposits, cracking, worn components and leakage. Check the tubing connection and mating valve components before reassembly.
Installation Guidelines
Disconnect power and isolate the chemical system before servicing. Follow the manufacturer instructions for valve installation, orientation and system priming.
Ordering Information
Order Pulsafeeder L3101TC3-PVC for the PVC suction valve assembly with a 1/2-inch OD tubing connection.
| Type | Accessories |
|---|
