Pulsafeeder L3300H01-PVC PVC/CSPE Pump Bleed Valve Assembly - 3/8-Inch OD
PVC/Hypalon Pump Bleed Valve | 3/8-Inch OD
PVC/CSPE bleed valve assembly for 3/8-inch OD tubing connections. Supports air bleeding and priming of compatible PULSAtron metering pumps.
The Pulsafeeder L3300H01-PVC is a PVC/Hypalon bleed valve assembly with a 3/8-inch OD tubing connection. It is used on compatible PULSAtron chemical metering pumps to assist the removal of trapped air during priming.
Bleed Valve Function in Metering Pumps
A chemical metering pump may lose prime after maintenance, suction line disturbance or chemical container replacement. The bleed valve allows trapped air to be released through the intended bleed connection while following the manufacturer priming procedure.
Verified Specifications
- Manufacturer: Pulsafeeder
- Part Number: L3300H01-PVC
- Component: Bleed Valve Assembly
- Housing Material: PVC
- Seal Material: CSPE / Hypalon
- Connection: 3/8-Inch OD Tubing
- Application: Compatible PULSAtron Chemical Metering Pumps
Difference Between H01 and H03
L3300H01-PVC uses a 3/8-inch connection, while L3300H03-PVC is listed with a 1/2-inch connection. Both use PVC/CSPE construction, but the connection configurations are different.
Material Compatibility
The PVC body and CSPE sealing components must be compatible with the chemical solution, concentration and temperature. Consult the original pump specifications before selecting a replacement.
Maintenance Checks
Inspect the bleed valve if leakage occurs around the fitting or if the valve cannot be operated normally. Also check the suction line and other liquid-end components when priming problems persist.
Installation and Priming
Release system pressure before removing the existing valve. Follow the Pulsafeeder operating manual for installing the replacement, connecting tubing and returning the pump to service.
Ordering
Order Pulsafeeder L3300H01-PVC for the 3/8-inch PVC/CSPE bleed valve assembly.
| Type | Accessories |
|---|
