Pulsafeeder L3300T01-FPP FPP/PTFE Air Bleed Valve Assembly - 3/8-Inch OD
GFPPL/PTFE Bleed Valve with 3/8-Inch OD Tubing Connection
FPP/PTFE chemical metering pump bleed valve with 3/8-inch OD tubing connection. Compatible with specified PTCH, PTCJ, PTC1 and PTT1 wet ends.
The Pulsafeeder L3300T01-FPP is a FPP/PTFE bleed valve assembly with a 3/8-inch OD tubing connection. It is listed for PTCH, PTCJ, PTC1 and PTT1 PULSAtron wet ends, making the exact configuration important when replacing an original bleed valve.
Air Removal During Chemical Pump Priming
Metering pumps rely on a properly primed liquid end to deliver chemical solution. This bleed valve allows trapped air to be released through the designated bleed connection during startup or maintenance.
Technical Characteristics
- Manufacturer: Pulsafeeder
- Part Number: L3300T01-FPP
- Assembly Type: Bleed Valve
- Body Material: FPP / Polypropylene
- O-Ring Material: PTFE / TFE
- Included Gasket: PTFE
- Connection Size: 3/8-Inch OD
- Listed Wet Ends: PTCH, PTCJ, PTC1, PTT1
Why the FPP Version Matters
Part L3300T01-FPP uses an FPP body rather than the PVC housing found in L3300T01-PVC. These are distinct manufacturer part numbers with different wet-end compatibility listings.
PTFE Sealing Configuration
PTFE sealing components are specified for this valve variant. Confirm suitability for the process fluid, temperature and complete liquid-end material configuration before installation.
Inspection During Pump Service
Check the valve for leakage, damaged threads or fittings, worn seals and accumulated deposits. Persistent priming difficulties may also require inspection of suction tubing and check valves.
Replacement Instructions
Disconnect electrical power, isolate the chemical system and relieve pressure before servicing. Follow the manufacturer bleed-valve installation and pump-priming procedure.
Ordering
Order Pulsafeeder L3300T01-FPP for the 3/8-inch FPP/PTFE bleed valve configuration.
| Type | Accessories |
|---|
