Pulsafeeder L3300V01-PVD PVDF/Viton Bleed Valve Assembly - 3/8-Inch

Pulsafeeder L3300V01-PVD PVDF/Viton Bleed Valve Assembly

The Pulsafeeder L3300V01-PVD is a 3/8-inch OD PVDF/Viton bleed valve assembly specifically identified for PULSAtron KVC1 wet ends. It features a PVDF body, Viton O-ring and included PTFE gasket for the designated liquid-end configuration.

KVC1-Specific Bleed Valve

The assembly is used at the pump head discharge fitting to help release trapped air during priming. Its 3/8-inch connection and KVC1 compatibility distinguish it from the larger KVC3 bleed valve assembly.

Product Specifications

• Manufacturer: Pulsafeeder
• SKU: L3300V01-PVD
• Product Type: Bleed Valve Assembly
• Body Material: PVDF
• O-Ring: Viton / FKM
• Tubing Connection: 3/8-Inch OD
• Gasket: PTFE Included
• Compatible Wet End: KVC1

Supporting Reliable Pump Priming

Trapped gas can interfere with the ability of a metering pump to establish normal chemical flow. The bleed valve provides a controlled venting connection during startup and maintenance when operated according to the manufacturer instructions.

PVDF/Viton Material Configuration

The PVDF body and Viton sealing arrangement should be selected according to the original pump liquid end. Verify chemical compatibility for the actual process fluid, concentration and operating temperature.

Connection and Wet-End Verification

Before replacing the valve, confirm the KVC1 wet-end code and the 3/8-inch OD tubing connection. L3300V03-PVD is a separate 1/2-inch assembly for KVC3 configurations.

Inspection and Maintenance

Check the valve for leaks, deposits and damaged tubing connections. Inspect the Viton O-ring and PTFE gasket, and ensure the bleed return tubing is correctly routed.

Installation and Ordering

Depressurize the chemical system before service. Order Pulsafeeder L3300V01-PVD for the PVDF/Viton 3/8-inch bleed valve assembly specified for the PULSAtron KVC1 wet end.