Pulsafeeder LB64SA-VVC1-XXX PULSAtron Series A Plus Metering Pump LB64SA-VVC1-XXX
30 GPD, 100 PSI Series A Plus Chemical Metering Pump
Pulsafeeder LB64SA-VVC1-XXX Series A Plus chemical metering pump delivers up to 30 GPD at 100 PSI with manual control, 115 VAC power, PVC head, Viton seals and ceramic valve balls.
LB64SA-VVC1-XXX is a PULSAtron Series A Plus chemical metering pump from Pulsafeeder. It is rated for up to 30 gallons per day at 100 PSI and uses a solenoid-driven diaphragm design for repeatable chemical injection.
Flow & Control
The pump provides manual adjustment of both stroke rate and stroke length, giving operators direct control over chemical feed output. Its rated maximum flow is 1.25 GPH, with a maximum stroke rate of 125 strokes per minute and a published 100:1 turndown ratio.
Material Configuration
- Liquid-End Code: VVC1
- Pump Head / Fittings: PVC
- Valve Seats / O-Rings: Viton
- Valve Balls: Ceramic
- Diaphragm: PTFE-faced CSPE
- Tubing: 3/8-inch OD
Electrical & Operating Data
- Voltage: 115 VAC
- Frequency: 50/60 Hz
- Maximum Flow: 30 GPD / 1.25 GPH
- Maximum Pressure: 100 PSI
- Maximum Viscosity: 1,000 cP
- Maximum Stroke Rate: 125 strokes/min
- Operating Mode: Manual
Designed for Dependable Chemical Feed
PULSAtron Series A Plus pumps use guided ball check valves to improve priming and reduce reverse flow. The pump also incorporates electrical circuit protection, thermal overload protection with automatic reset, internal noise dampening and a water-resistant enclosure.
The LB64SA-VVC1-XXX can be used in water treatment, process chemical feed, disinfection, pH adjustment and other metering applications where its flow, pressure and material configuration are appropriate. Verify chemical compatibility with PVC, Viton and ceramic components before installation.
| Pump Head Materials | GFPPL, PVC, PVDF, 316 SS |
|---|---|
| Fitting Material Available | GFPPL, PVC, PVDF |
| Bleed Valve | Same as fitting and check valve selected (except 316SS) |
| Stroke Frequency Turndown Ratio | 0:10 / 100:1 by Model |
| Stroke Length Turn-Down Ratio | 10:1 |
| Seat O-Rings Available | PTFE, CSPE, Viton |
| Balls Available | Ceramic, PTFE, 316 SS, Alloy C |
| Diaphragms | PTFE-faced CSPE-backed |
| Power Input | 115 VAC - 50/60 HZ -1 ph, 230 VAC - 50/60 HZ - 1 ph |
| Peak Input Power | 130 Watts, Average Input Power At Max SPM: 50 Watts |
| Average Current Draw | 115 VAC: Amps - 0.6, 230 VAC: Amps - 0.3 |
| Reproducibility | ± 3% at maximum capacity |
| Average Input Power @ Max SPM | 50 Watts |
| Connection Piping | 1/4" FNPT |
| Strokes/Minute (SPM) | 125 / 250 by Model |
| Product Options | Optional Control: External pace with auto/manual selection Optional ratio: 1000:1 by model |
| Accessories | Dampeners Gauges KOP Kits Pre-Engineered Systems Process Controllers Tanks |
| Tubing Available | Clear PVC, White PE, PVDF |
