Pulsafeeder J26885 PVC Bulkhead Fitting Assembly for 3/8-Inch Tubing J26885

The Pulsafeeder J26885 is a PVC bulkhead fitting assembly for 3/8-inch tubing, used in compatible chemical feed tank systems.

Pulsafeeder documentation identifies J26885 as a bulkhead fitting without a strainer. The manufacturer lists it in chemical tank and feed system parts schedules.

Product Specifications

• Manufacturer: Pulsafeeder
• Part Number: J26885
• Product Type: Bulkhead Fitting Assembly
• Material: PVC
• Tubing Size: 3/8 Inch
• Strainer: Not Included
• Application: Chemical Feed Tank Connection
• Documented Systems: ITS and TSF
• Factory-Assembled Tank Version: J26885AT
• Pressure Rating: Not Independently Verified
• Seal Material: Not Independently Verified

Bulkhead Fitting Function

The J26885 fitting provides a tubing connection through the wall of a compatible chemical solution tank.

Bulkhead connections are used in chemical feed installations where a line must pass through the tank wall.

3/8-Inch Tubing Connection

The assembly is specified for 3/8-inch tubing. Confirm the tubing outside diameter and the required connection hardware before installation.

Without Strainer

The manufacturer identifies J26885 as a bulkhead fitting without strainer.

Pulsafeeder documentation explains that the 3/8-inch bulkhead is commonly used for bleed valve return tubing, where a strainer is not required.

For applications requiring a strainer-equipped bulkhead fitting, verify the correct alternative part number.

Compatible Chemical Feed Tank Systems

J26885 appears in manufacturer documentation for compatible ITS and TSF chemical tank and feed systems.

Confirm the tank configuration, tubing size and installation requirements using the appropriate equipment manual.

Typical Applications

• Chemical feed tank tubing connections
• Bleed valve return line connections
• ITS tank system maintenance
• TSF tank system servicing
• Replacement of damaged tank bulkhead fittings
• Industrial chemical dosing equipment maintenance

Inspection and Maintenance

Inspect the fitting for cracks, chemical deterioration, damaged threads and leakage.

Check the associated seals and tubing connections before returning the system to service.

Installation Guidelines

Isolate and drain the tank as required by the manufacturer procedure. Follow appropriate chemical handling precautions.

Install the fitting using the correct tank opening, sealing arrangement and compatible tubing connection.

Check for leakage after installation.

Ordering Information

Order Pulsafeeder J26885 for the bulkhead fitting assembly without strainer.

The manufacturer also identifies J26885AT as the factory-assembled tank variant. Confirm the required configuration before ordering.