PULSAtron L0800100-HYP Hypalon Valve Seat for 1/4 Inch Ball Valve L0800100-HYP
Hypalon Replacement Check Valve Seat for 0.25 Inch Ball
PULSAtron L0800100-HYP Hypalon replacement valve seat for compatible 1/4-inch ball check valve assemblies in chemical metering pump liquid ends.
The Pulsafeeder PULSAtron L0800100-HYP is a Hypalon replacement valve seat identified for compatible 1/4-inch ball check valve assemblies. It provides the seating surface for the valve ball within the designated chemical metering pump liquid-end assembly.
The Pulsafeeder parts catalog identifies this component as a Hypalon seat for a 0.25-inch ball valve. It is intended for replacement applications requiring the original equipment part number L0800100-HYP.
Product Specifications
- Manufacturer: Pulsafeeder
- Product Line: PULSAtron
- Part Number: L0800100-HYP
- Component: Ball Check Valve Seat
- Material: Hypalon
- Material Family: Chlorosulfonated Polyethylene (CSPE)
- Valve Ball Size: 1/4 inch (0.25 inch)
- Function: Check Valve Ball Sealing
- Application: Compatible Chemical Metering Pump Liquid Ends
- Seat Dimensions: Manufacturer Verification Required
- Pump Compatibility: Confirm Original Parts Diagram
Hypalon Valve Seat Features
The L0800100-HYP Hypalon valve seat provides an elastomer sealing surface for a compatible ball check valve.
Hypalon is used in selected chemical-handling applications because of its resistance to certain chemicals. The suitability of the material depends on the fluid being pumped and the operating conditions.
Check Valve Operation
Ball check valves help control the direction of chemical flow during the suction and discharge strokes of a metering pump.
The PULSAtron L0800100-HYP forms the seating interface for a 1/4-inch check valve ball. Proper contact between the ball and valve seat helps limit reverse flow through the valve assembly.
Applications
This replacement valve seat is intended for compatible chemical metering pump assemblies requiring Hypalon sealing material and a 0.25-inch ball check valve configuration.
Potential applications include:
- Compatible PULSAtron chemical metering pumps
- Ball check valve assembly maintenance
- Industrial chemical feed equipment
- Water treatment dosing installations
- Wastewater chemical injection systems
- Replacement of worn check valve seats
Maintenance and Inspection
Inspect the valve seat for cracking, deformation, swelling, hardening and damage to the sealing surface.
Damaged seats may reduce the effectiveness of the check valve seal and affect chemical metering performance.
Use correctly specified replacement components when servicing the pump liquid end.
Replacement and Installation
Before ordering the Pulsafeeder PULSAtron L0800100-HYP, verify the original part number, valve ball size, pump model and liquid-end materials.
Confirm chemical compatibility and follow the manufacturer installation and maintenance procedures.
Depressurize and isolate the chemical feed system before removing or replacing check valve components.
| Type | Accessories |
|---|
