Pulsafeeder L3201VC1-PVC PVC/Viton Discharge Valve Assembly - 3/8 Inch L3201VC1-PVC

The Pulsafeeder L3201VC1-PVC is a PULSAtron discharge valve assembly designed for compatible VVC1 wet-end configurations.

The assembly features a PVC body, Viton O-ring and 3/8-inch outside-diameter tubing connection.

Product Specifications

• Manufacturer: Pulsafeeder
• Part Number: L3201VC1-PVC
• Product Type: Discharge Valve Assembly
• Body Material: PVC
• O-Ring Material: Viton
• Tubing Connection: 3/8-Inch OD
• Wet-End Configuration: VVC1
• Documented Compatibility: PULSAtron K2-VVC1 Wet End
• Included Component: O-Ring
• Pressure Rating: Verify Manufacturer Documentation

PULSAtron Discharge Valve Function

The discharge valve helps direct metered chemical from the pump head into the discharge tubing while limiting reverse flow.

VVC1 Wet-End Compatibility

The L3201VC1-PVC is listed for VVC1 wet-end configurations. Supplier documentation specifically identifies the PULSAtron K2-VVC1 wet end.

PVC and Viton Materials

The valve assembly is identified with a PVC body and Viton O-ring. Verify chemical compatibility with the pumped liquid and operating conditions.

3/8-Inch OD Tubing Connection

The assembly is specified for 3/8-inch outside-diameter tubing. Confirm the original tubing and connection hardware before replacement.

Typical Applications

• PULSAtron VVC1 wet-end maintenance
• Discharge valve replacement
• Chemical metering pump repairs
• Industrial water treatment dosing
• Liquid-end preventive maintenance

Inspection and Maintenance

Inspect the original valve for deposits, damaged seals, leakage and chemical deterioration. Check the mating valve components before reassembly.

Installation Guidelines

Disconnect pump power, isolate the chemical system and release pressure before servicing. Follow the manufacturer instructions for valve orientation and installation.

Ordering Information

Order Pulsafeeder L3201VC1-PVC for the PVC/Viton discharge valve assembly with 3/8-inch OD tubing connection.