Pulsafeeder LMK5TB-KTC3-XXX MP Series Electronic Metering Pump LMK5TB-KTC3-XXX

Pulsafeeder LMK5TB-KTC3-XXX MP Series Electronic Metering Pump LMK5TB-KTC3-XXX

Pulsatron LMXXXX-XXXX-XXX MP Series Electronic Metering Pumps with Pump Head Materials: GFPPL, PVC, PVDF, 316 SS, Fitting Material Available: GFPPL, PVC, PVDF
SKU:LMK5TB-KTC3-XXX
Model Number: LMXXXX-XXXX-XXX
Price: $2641.00

A PULSAtron Series MP electronic diaphragm metering pump. Its KTC3 liquid end uses PVDF head and fittings, PTFE (TFE) seats and O-rings, ceramic valve balls.


WHERE TO BUY?
Overview
Specification
Documents
Parts
Accessories
Overview

Pulsafeeder LMK5TB-KTC3-XXX MP Series Electronic Metering Pump LMK5TB-KTC3-XXX

The Pulsafeeder LMK5TB-KTC3-XXX is a PULSAtron Series MP electronic diaphragm metering pump. Its KTC3 liquid end uses PVDF head and fittings, PTFE (TFE) seats and O-rings, ceramic valve balls.

Key Specifications

  • Series: Series MP
  • Pump Head / Fittings: PVDF
  • Seats / O-Rings: PTFE (TFE)
  • Valve Balls: Ceramic
  • Wet-End Code: KTC3
  • Connection Size: 1/2-Inch OD Tubing

Application

PULSAtron solenoid-driven diaphragm pumps are used for accurate chemical dosing in water treatment, chemical processing and industrial applications. Confirm flow, pressure, voltage and liquid-end materials against the process requirements before ordering.

Selection Checklist

  1. Confirm the required flow rate and system pressure.
  2. Check liquid-end material compatibility with the chemical.
  3. Confirm the supply voltage.
  4. Match the connection size to the installation.

Installation and Safety

Disconnect electrical power, isolate the chemical supply and relieve system pressure before servicing. Follow the Pulsafeeder instructions for the equipment.

Ordering Information

Specify Pulsafeeder LMK5TB-KTC3-XXX for this metering pump.

Specification
ModelLMK5TB-KTC3-XXX
ManufacturerPulsafeeder
Product LinePULSAtron
SeriesSeries MP
Pump Head / FittingsPVDF
Seats / O-RingsPTFE (TFE)
Valve BallsCeramic
Wet-End CodeKTC3
Connection Size1/2-Inch OD Tubing
Pump Head MaterialsGFPPL, PVC, PVDF, 316 SS
Fitting Material AvailableGFPPL, PVC, PVDF
Bleed ValveSame as fitting and check valve selected (except 316SS)
Turndown Ratio1000:1
Seat O-Rings AvailablePTFE, CSPE, Viton
Balls AvailableCeramic, PTFE, 316 SS, Alloy C
DiaphragmsPTFE-faced CSPE-backed
Tubing AvailableClear PVC, White PE, PVDF
Power Input115 VAC - 50/60 HZ -1 ph, 230 VAC - 50/60 HZ - 1 ph
Peak Input Power300 Watts, Average Input Power at Max SPM: 130 Watts
Average Current Draw115 VAC: Amps - 1.0, 230 VAC: Amps - 0.5
AccessoriesDampeners , Gauges , KOP Kits , Pre-Engineered Systems , Process Controllers , Tanks
Documents

Related Documents List

Parts
No results found.
Accessories
No matching products found.