Pulsatron LPD3MA-WTC1-XXX Electronic Metering Pump LPD3MA-WTC1-XXX

Pulsatron LPD3MA-WTC1-XXX Electronic Metering Pump LPD3MA-WTC1-XXX

E+ Series Pulsatron Pumps with PTFE-faced CSPE-backed Diaphragm, Connection Size Tubing .25
SKU:LPD3MA-WTC1-XXX
Model Number: LPXXXX-XXXX-XXX
Price: $1716.00

A PULSAtron Series E Plus electronic diaphragm metering pump with a maximum flow of 0.50 GPH / 12 GPD / 1.9 LPH and a pressure rating up to 250 PSI / 17 bar. Its WTC1 liquid end uses High-Pressure PVC head and fittings, PTFE (TFE) seats and O-rings, ceramic valve balls.


WHERE TO BUY?
Overview
Specification
Documents
Parts
Overview

Pulsatron LPD3MA-WTC1-XXX Electronic Metering Pump LPD3MA-WTC1-XXX

The Pulsafeeder LPD3MA-WTC1-XXX is a PULSAtron Series E Plus electronic diaphragm metering pump with a maximum flow of 0.50 GPH / 12 GPD / 1.9 LPH and a pressure rating up to 250 PSI / 17 bar. Its WTC1 liquid end uses High-Pressure PVC head and fittings, PTFE (TFE) seats and O-rings, ceramic valve balls.

Key Specifications

  • Series: Series E Plus
  • Pump Head / Fittings: High-Pressure PVC
  • Seats / O-Rings: PTFE (TFE)
  • Valve Balls: Ceramic
  • Wet-End Code: WTC1
  • Maximum Flow: 0.50 GPH / 12 GPD / 1.9 LPH
  • Maximum Pressure: 250 PSI / 17 bar
  • Voltage: 115 VAC
  • Connection Size: 3/8-Inch OD Tubing

Application

PULSAtron solenoid-driven diaphragm pumps are used for accurate chemical dosing in water treatment, chemical processing and industrial applications. Confirm flow, pressure, voltage and liquid-end materials against the process requirements before ordering.

Selection Checklist

  1. Confirm the required flow rate and system pressure.
  2. Check liquid-end material compatibility with the chemical.
  3. Confirm the supply voltage.
  4. Match the connection size to the installation.

Installation and Safety

Disconnect electrical power, isolate the chemical supply and relieve system pressure before servicing. Follow the Pulsafeeder instructions for the equipment.

Ordering Information

Specify Pulsafeeder LPD3MA-WTC1-XXX for this metering pump.

Specification
ModelLPD3MA-WTC1-XXX
ManufacturerPulsafeeder
Product LinePULSAtron
SeriesSeries E Plus
Pump Head / FittingsHigh-Pressure PVC
Seats / O-RingsPTFE (TFE)
Valve BallsCeramic
Wet-End CodeWTC1
Maximum Flow0.50 GPH / 12 GPD / 1.9 LPH
Maximum Pressure250 PSI / 17 bar
Voltage115 VAC
Connection Size3/8-Inch OD Tubing
Pump Head MaterialsGFPPL, PVC, PVDF, 316 SS
Fitting MaterialsGFPPL, PVC, PVDF
Bleed ValveSame as fitting and check valve selected (except 316SS)
Turndown Ratio100:1
Seat O-Rings AvailablePTFE, CSPE, Viton
Balls AvailableCeramic, PTFE, 316 SS, Alloy C
DiaphragmsPTFE-faced CSPE-backed
Tubing AvailableClear PVC, White PE, PVDF
Power Input115 VAC - 50/60 HZ -1 ph, 230 VAC - 50/60 HZ - 1 ph
Peak Input Power300 Watts, Average Input Power At Max SPM: 130 Watts
Average Current Draw115 VAC: Amps - 1.0, 230 VAC: Amps - 0.5
Reproducibility+/- 2% at maximum capacity
Max Stroke Frequency (SPM)125
AccessoriesDampeners , Gauges , KOP Kits , Pre-Engineered Systems , Process Controllers , Tanks
Documents

Related Documents List

Parts
No results found.