
Pulsatron LPH4SA-WTC1-XXX Electronic Metering Pump LPH4SA-WTC1-XXX
E+ Series Pulsatron Pumps with PTFE-faced CSPE-backed Diaphragm, Connection Size Tubing .25
A PULSAtron Series E Plus electronic diaphragm metering pump with a maximum flow of 1.70 GPH / 41 GPD / 4 LPH and a pressure rating up to 250 PSI / 17 bar. Its WTC1 liquid end uses High-Pressure PVC head and fittings, PTFE (TFE) seats and O-rings, ceramic valve balls.
Pulsatron LPH4SA-WTC1-XXX Electronic Metering Pump LPH4SA-WTC1-XXX
The Pulsafeeder LPH4SA-WTC1-XXX is a PULSAtron Series E Plus electronic diaphragm metering pump with a maximum flow of 1.70 GPH / 41 GPD / 4 LPH and a pressure rating up to 250 PSI / 17 bar. Its WTC1 liquid end uses High-Pressure PVC head and fittings, PTFE (TFE) seats and O-rings, ceramic valve balls.
Key Specifications
- Series: Series E Plus
- Pump Head / Fittings: High-Pressure PVC
- Seats / O-Rings: PTFE (TFE)
- Valve Balls: Ceramic
- Wet-End Code: WTC1
- Maximum Flow: 1.70 GPH / 41 GPD / 4 LPH
- Maximum Pressure: 250 PSI / 17 bar
- Voltage: 115 VAC
- Connection Size: 3/8-Inch OD Tubing
Application
PULSAtron solenoid-driven diaphragm pumps are used for accurate chemical dosing in water treatment, chemical processing and industrial applications. Confirm flow, pressure, voltage and liquid-end materials against the process requirements before ordering.
Selection Checklist
- Confirm the required flow rate and system pressure.
- Check liquid-end material compatibility with the chemical.
- Confirm the supply voltage.
- Match the connection size to the installation.
Installation and Safety
Disconnect electrical power, isolate the chemical supply and relieve system pressure before servicing. Follow the Pulsafeeder instructions for the equipment.
Ordering Information
Specify Pulsafeeder LPH4SA-WTC1-XXX for this metering pump.
| Model | LPH4SA-WTC1-XXX |
|---|---|
| Manufacturer | Pulsafeeder |
| Product Line | PULSAtron |
| Series | Series E Plus |
| Pump Head / Fittings | High-Pressure PVC |
| Seats / O-Rings | PTFE (TFE) |
| Valve Balls | Ceramic |
| Wet-End Code | WTC1 |
| Maximum Flow | 1.70 GPH / 41 GPD / 4 LPH |
| Maximum Pressure | 250 PSI / 17 bar |
| Voltage | 115 VAC |
| Connection Size | 3/8-Inch OD Tubing |
| Pump Head Materials | GFPPL, PVC, PVDF, 316 SS |
| Fitting Materials | GFPPL, PVC, PVDF |
| Bleed Valve | Same as fitting and check valve selected (except 316SS) |
| Turndown Ratio | 100:1 |
| Seat O-Rings Available | PTFE, CSPE, Viton |
| Balls Available | Ceramic, PTFE, 316 SS, Alloy C |
| Diaphragms | PTFE-faced CSPE-backed |
| Tubing Available | Clear PVC, White PE, PVDF |
| Power Input | 115 VAC - 50/60 HZ -1 ph, 230 VAC - 50/60 HZ - 1 ph |
| Peak Input Power | 300 Watts, Average Input Power At Max SPM: 130 Watts |
| Average Current Draw | 115 VAC: Amps - 1.0, 230 VAC: Amps - 0.5 |
| Reproducibility | +/- 2% at maximum capacity |
| Max Stroke Frequency (SPM) | 125 |
| Accessories | Dampeners , Gauges , KOP Kits , Pre-Engineered Systems , Process Controllers , Tanks |
