
Pulsatron LPH7EA-WTC3-BPXXX Metering Pump, Series E Plus Pump
PULSAtron Series E Plus Metering Pump
A PULSAtron Series E Plus electronic diaphragm metering pump. Its WTC3 liquid end uses High-Pressure PVC head and fittings, PTFE (TFE) seats and O-rings, ceramic valve balls.
Pulsatron LPH7EA-WTC3-BPXXX Metering Pump, Series E Plus Pump
The Pulsafeeder LPH7EA-WTC3-BPXXX is a PULSAtron Series E Plus electronic diaphragm metering pump. Its WTC3 liquid end uses High-Pressure PVC head and fittings, PTFE (TFE) seats and O-rings, ceramic valve balls.
Key Specifications
- Series: Series E Plus
- Pump Head / Fittings: High-Pressure PVC
- Seats / O-Rings: PTFE (TFE)
- Valve Balls: Ceramic
- Wet-End Code: WTC3
- Connection Size: 1/2-Inch OD Tubing
Application
PULSAtron solenoid-driven diaphragm pumps are used for accurate chemical dosing in water treatment, chemical processing and industrial applications. Confirm flow, pressure, voltage and liquid-end materials against the process requirements before ordering.
Selection Checklist
- Confirm the required flow rate and system pressure.
- Check liquid-end material compatibility with the chemical.
- Confirm the supply voltage.
- Match the connection size to the installation.
Installation and Safety
Disconnect electrical power, isolate the chemical supply and relieve system pressure before servicing. Follow the Pulsafeeder instructions for the equipment.
Ordering Information
Specify Pulsafeeder LPH7EA-WTC3-BPXXX for this metering pump.
| Brand | Pulsatron |
|---|---|
| Product Type | Pump |
| Material - Diaphragm | PTFE faced CSPE |
| Motor Hz Rating | 50/60 |
| Material - Balls | Ceramic |
| Max Flow | 10 gph (240 gpd) (37.9 lph) |
| Max Pressure | 35 psi (2.4 bar) |
| Turndown Ratio | 100:1 |
| Voltage | 115 VAC |
| Max Viscosity | 1000 cps |
| Materials of Construction | PVC, TFE |
| Inlet Tubing Size | 1/2 in O.D. |
| Displacement | Positive Displacement |
| Reproducibility | +/- 2% at maximum capacity |
